Every radio system has an edge. Drive far enough up a forest road in Mason County or into the hills of east Lewis County and the signal thins out, then drops. Until now, the usual answer was a second device: a phone with a push-to-talk app riding next to the radio.

Kenwood’s answer is Viking Connect. It puts broadband push-to-talk inside the radio itself, so one device covers both networks. Here is what it is, how it works and who should be looking at it.

What Is Viking Connect?

Viking Connect is a feature for Kenwood Viking 8000 Series radios that combines land mobile radio (LMR) with push-to-talk over broadband. The broadband side runs on ESChat, a push-to-talk service used widely in public safety.

EFJohnson, the JVCKENWOOD company behind the Viking line, introduced Viking Connect in March 2026 at IWCE in Las Vegas. If you saw it previewed in late 2025, you may know it by its earlier name, Viking Broadband Voice. It is the same idea under a new name.

Kenwood has put real weight behind it. In July 2026, JVCKENWOOD completed its acquisition of ESChat, which means the broadband service and the radios now sit under one roof.

Which Radios Support It?

Viking Connect runs on two radios today:

  • Viking VP8000 portable, in both full keypad and partial keypad models
  • Viking VM8000 mobile

Both are multi-band, multi-protocol radios that cover VHF, UHF and 700/800 MHz. If you are not familiar with the portable, our Viking VP8000 page covers the full feature set, and our VP8000 vs. VP6000 comparison explains why agencies are moving to the 8000 Series.

What about the new slimline model? Kenwood has said the VP8000S keeps the VP8000’s capabilities in a smaller housing, but it has not yet confirmed Viking Connect support for that radio. We will update this post when it does.

How Viking Connect Works

The radio watches signal conditions and moves between your radio system and broadband on its own. The person carrying it does not have to change channels or pick up another device.

Three settings control that behavior:

  1. Automatic switching. When LMR signal drops below a set level, the radio moves to broadband. When radio coverage returns, it moves back.
  2. User priority. From the radio menu, the user can choose to favor LMR or broadband.
  3. Administrator thresholds. Your radio administrator sets the signal levels that trigger a switch using Kenwood’s Armada fleet management software, so the whole fleet behaves the same way.

There is also a third layer. EFJohnson says that when a VP8000 or VM8000 is outside both LMR and broadband coverage, it can still talk radio to radio in high-power direct mode. That gives crews three ways to stay in contact from a single radio.

What Is the Viking Connect Gateway?

Viking Connect Gateway links the broadband system to your radio system at the network level. Its job is to let ESChat users and radio users share the same talk groups.

That matters for people who do not carry a radio. A chief in a meeting, an emergency manager at home or a public works supervisor on a laptop can use ESChat on a phone or PC and talk directly with crews on Viking radios.

Agencies have been able to bridge broadband and radio for years, but it usually took extra hardware or costly system-to-system links. According to EFJohnson, the gateway does the same job with less hardware.

What It Means for Agencies in Southwest Washington

Our service area mixes cities, timber country, river valleys and coastline. Radio coverage in that kind of terrain is never perfect, and the gaps tend to be exactly where a deputy, firefighter or road crew ends up working alone.

Viking Connect helps in a few specific situations:

  • Coverage gaps. Units that leave radio coverage but still have a broadband signal stay on the air.
  • Mutual aid. Crews working outside their home system can stay in touch with their own dispatch over broadband.
  • Command staff and investigators. People who rarely carry a full-size portable can join radio talk groups from a phone.
  • Backup. If a tower site goes down, broadband gives the fleet a second path.

It is not a replacement for a radio system. Broadband depends on commercial networks that can be congested or damaged in a major incident, which is why public safety still builds and maintains LMR. Viking Connect is best thought of as a second path on the same radio, with direct mode as the third. If you are weighing radio against cellular more broadly, our LTE two-way radio service page and our guide to what LTE two-way radios cost are good places to start.

Security

Viking Connect works across ESChat’s service platforms, including ESChat for Government. ESChat lists that environment as FedRAMP, GovRAMP and TX-RAMP authorized. For agencies that handle sensitive traffic, that is the detail to raise with your IT and compliance staff early. You can read more on the ESChat Viking Connect page.

What You Need to Get Started

Viking Connect is not a free firmware update. Based on what Kenwood and ESChat have published, you need:

  • A Viking VP8000 or VM8000
  • A Viking Connect subscription, which includes the ESChat service licenses and is sold through EFJohnson and its dealers
  • Armada programming to set your switching thresholds and priorities
  • The Viking Connect Gateway if you want broadband users and radio users on shared talk groups

Kenwood has not published pricing. As an authorized Kenwood Viking dealer, we can quote Viking Connect for your fleet, whether you are adding it to radios you already own or building it into a new purchase. If you are planning that purchase with grant money, our posts on radios for government and municipal agencies and FY2026 JAG grant funding cover the funding side.

Frequently Asked Questions

Is Viking Connect the same as Viking Broadband Voice?

Yes. Viking Broadband Voice was the name Kenwood used when it previewed the feature in 2025. It launched in March 2026 as Viking Connect.

Does Viking Connect work on the VP6000 or VP5000?

No. Kenwood lists it for the Viking 8000 Series only, which means the VP8000 portable and VM8000 mobile.

Does the user have to switch networks manually?

No. The radio switches based on signal conditions. Users can set a preference for LMR or broadband if they want to, and administrators control the switching levels.

Do we still need our radio system?

Yes. Viking Connect adds broadband as a second path. Your LMR system remains the primary network for mission-critical voice.

Can dispatch or command staff join from a phone?

Yes, with ESChat on a phone or PC and the Viking Connect Gateway linking broadband to your radio talk groups.

Talk to Whisler About Viking Connect

Whisler Communications has served Southwest Washington since 1959, and we sell, program and service the full Kenwood Viking lineup. If you want to know what Viking Connect would look like on your system, or how it fits with a wide area network, contact our team and we will walk you through it.